Harbormaster
Marine Outboard Drive Model SW-2080
Standard
Unit General Specifications
|
Item |
Description |
Supplier Data |
|
1 |
Model: Type: Origin: |
Harbormaster Marine, Inc.,
Model SW-2080 Marine propulsion unit for
on deck installation Manufactured in USA |
|
2 |
Engine: |
Manufactured by Cummins
Engine Co., USA |
|
a) |
Model: |
4BT3.9 |
|
b) |
Type: |
Four (4) cylinder, inline,
turbocharged marine/industrial diesel engine |
|
c) |
No. of Strokes: |
Four (4) stroke |
|
d) |
Flywheel hp/rpm: |
80 hp @ 2200 rpm (60 kw @
2200 rpm) continuous |
|
e) |
Cooling System: |
Water cooled, radiator
type |
|
3 |
Steering Range: |
Three hundred sixty
degrees. |
|
4 |
Propeller Speed: |
538 @ 2200 engine rpm. |
|
5 |
Gearboxes: Reduction Ratio: |
Manufactured by
Harbormaster Marine, Inc. 4.09:1 overall |
|
6 a) b) c) d) |
Stem: Standard Length: Maximum Length: Minimum Length: Stem, Raise Angle: |
(From mounting deck
surface to centerline of propeller.) 1651 mm (65²) 2032
mm (80²) Additional lengths available 1524 mm (60²) Ninety degrees |
|
7 a) b) c) |
Propeller: Diameter: No. of Blades: Thrust: |
Manganese Bronze, right
hand 762 mm (32²) Three (3) blades 860 kg (1900 lb) |
|
8 |
Controls: |
Full power hydraulic
steering system and full hydraulic power elevating system. |
|
9 a) b) |
Safety Features: |
“Automatic kick up,” if stem
strikes a submerged object. Engine automatic and
emergency shutdown is available. |
|
10 |
Chassis: |
Welded construction of
rectangular tubing for stiffness and long life. |
|
11 |
Hydraulic Tank: |
Integral part of chassis. |
|
12 |
Fixation System: |
Bolt on type, requires no
welding. |
|
13 |
Weight of Assembly: |
2.49 m ton wet (5500 lb) |
|
14 a) b) c) |
Dimensions Length: Width: Height: |
Front of frame to end of fairwater nut: 2235 mm (88²) 1676 mm (66²) Deck to top of air
cleaner: 1778 mm (70²) |
|
15 |
Electrical System
Specifications: |
12 (twelve) VDC with
starting motor, battery charging alternator, battery, and cables. |
|
16 |
Optional In-Base Tank: |
147.5 liters (39.0 US
gallons), sufficient for 5.0 working hours at rated speed and load. |
MJB
Rev December 04 SW-2080 Unit Specification
SH\Harbormaster Files
Harbormaster
Marine Outboard Drive Model SW-2080
Optional
Equipment
|
Item |
Description |
|
1 |
Single remote control
freestanding console suitable for the independent control and monitoring of
one (1) propulsion unit. The console will include plug in cables between the console and propulsion units. Standard console is equipped with "joy stick" lever steering and elevation, propeller angle indicator, throttle lever, engine tachometer, clutch engage/disengage push buttons, oil pressure and water temperature indicator lights, start/stop switch, panel light dimmer, hold-down system indicator lights, nameplates, and epoxy paint. Price includes 20 feet of
connecting cable to allow control from console. |
|
2 |
Auxiliary fuel tank – 454.32 liters (120 US gallons), sufficient for 27.3 working hours at rated speed. |
|
3 |
Spare propeller - 32² x 22² Manganese Bronze,
3-blade, right hand - bored to fit propeller shaft. |
|
4 |
Set of lifting cables to
enable the marine propulsion unit to be lifted onto/off of barge by a crane
with a single hook. |
|
5 |
Special tools to include
propeller wrench, propeller seal installation tool, and air pressure test
tool. |
|
6 a) b) |
Kim-Hotstart engine water
heater Model TPS-101GT8-000, 120V, single phase, 1000 watts, with
thermostatic range of 80 degrees F to 100 degrees F. Base mounted with external hoses. Kim-Hotstart push in type
block heater Model CUB-101FP, 120V, single phase, 1000 watts, heat shield and
11 foot cord, without thermostat.
Unit does not require external hose connections. |
|
7 |
Engine
oil/fuel/air/hydraulic filters for 4000 hours operation. |
|
8 |
Spark arrester exhaust silencer. |
MJB
Rev December 04 SW-2080 Unit Specification - SH\Harbormaster Files